Seamless Pipes
Standard productions include the following steel grades:
P235TR1/TR2, S235, P235GH, S355J2H, E355,E355+N, S195T, API, ASTM, in accordance with the following standards: EN10216, EN10210, EN10297, API 5L.
Seamless pipes from 42.4mm to 343mm diameter for thicknesses ranging from 5mm to 25-30mm.
Hot Rolled Round Bars
Standard productions include the following steel grades:
S355J2, S355JO, S235JR, C35E, C45E, C35R, C45R, 18NiCrMo5, 39NiCRMo3, 42CrMoS4, C15E, C15R, 16MnCrS5,20MnCrS5, LF2, in accordance with the following standards: SS4027-2007, DIN EN 10025-2:2005, DIN EN 10083-2:2006, DIN EN 10083-3:2007, DIN EN 10084:2008, ASTM A350/A305M-12
Diameter from 20 to 200mm.
Cold Drawn Bars
Round, Square, Rectangular, Hexagonal Cold Drawn Bars and special Profiles which can also be produced to order.
Also available peeled and ground in the following qualities:
Structural Steel: S235JR, S355JR, S355J2
Carbon Steel: C15,C18,C20,C35,C40,C45
Heat treatment steel: 42CrMo4, 41Cr4
Case-hardening steel: 16MnCr5, 20MnCr5, 20NiCrMo2-2
Steels for cutting: 11SMn30, 11SMnPb30,11SMn37, 11SMnPb37
Low carbon wire rod
Standard productions include the following steel grades:
SAE1006, SAE1008, SAE1010 diameters from 5.5 to 22 mm.
Black annealed wire
Standard productions include the following steel grades:
SAE1006; TS EN 10128 1-2
Diameters from 0.55 mm to 8.0 mm. – N/mm² max 450
HRC (Hot Rolled Coils) Pickled and Unpickled
The Productions include the following steel Standards:
EN10111; SAE J403; DIN 1614-1; EN10025-2; EN10028-2
Grades:
DD11; DD12; DD13; 1006; 1008: 1010; ST22; S235JR; S275JR; S355JR; P265GH.
CRC (Cold Rolled Coils) – CRS (Cold Rolled Sheets)
The Productions include the following steel Standards:
EN10130; EN10209; ASTM A1008; SAE J403; JIS G3141
Grades:
DC01; DC02; DC04; DC01EK; DC03EK; DC04EK; CS Type B; DS Type B; 1006; 1008; 1010; 1045; 1070; SPCC; SPCD; SPCE
Possibility of integrated cutting to produce sheets and strips.
Elecrolytic Tinplate in Coils and Sheets
The Productions include the following steel Standards:
EN10202; JIS G 3303 SPTE
Grades:
T2, T2.5, T3, T3.5, T4, T5 – BA; CA
Nails, Bolts, Clamps and Fasteners in general
The nails productions specialize in construction standards, specials, rings, EPAL and Coils.
The productions of screws and bolts include all the DIN standards of the main grades.